How to make a spring pastel poncho – Tanya Robinson

from Tanya Robinson - 20 May 2019

Hi I am Tanya Robinson and my journey as a fibre artist involves constant exploration of different materials and design ideas. What I love about wet felting is that even my most carefully planned projects always need to adapt when I see how materials respond and combine together. Typically I’ve used silk or cotton as a base material for scarves or shawls, and so I was very interested to see how a large piece of wool gauze as a canvas would bond with merino wool tops, viscose and silk. The wool gauze used in this poncho has a lovely rustic feel and unique grid and density which makes it perfect for a cosy, sturdy and resilient piece that will be a joy to wear.

poncho - nuno felting

wool gauze - extra fine merino wool tops

How to make a nuno felted poncho

Materials
140 cm wide wool gauze color Cloud 2,25 m
1st side:
Extra fine merino wool tops color Cloud
Viscose tops color Cloud
Grade A1 mulberry silk tops color Cloud
Silk hankies color Cloud 6/8 pieces
2nd side:
Extra fine merino wool tops color Cloud
16 micron merino wool tops color Pearl
Viscose tops color Cloud
Viscose tops color Fog
Viscose tops color Jeans, Violet, Natural white
Grade A1 mulberry silk tops color Cloud
Silk Fabric, cotton gauze bits left over, 3-4 small pieces
Lukewarm Water
Liquid soap
Bubble wrap to cover your whole project under and over
Electric hand-sander

Finished Poncho measurements:
Length: 93 cm
Width: 85 cm
Length diagonally: 120 cm
One Size, fits size: M/L

poncho - nuno felting tutorial

Follow the instructions step by step to make a nuno felted summery poncho

Spread the fabric on a large work surface to begin laying the wool on the first side. In my case it is the back side, although the poncho shown can work as a transformer and be worn both ways. I have folded the material in half, marking the possible head entrance and leaving it uncovered and placing the bubble wrap between the folded fabric to prevent felting through both sides.

As this is my first project with wool gauze, I cut a few small squares as samples to see how it responded to felting as well as shrinkage. Based on these trials I estimate the shrinkage of the wool gauze to be between 30-35 per cent. It is quite important to know your own shrinkage percentage at the start of the project.

poncho - nuno felting tutorial

With this in mind, I chose to lay the grey merino wool (nuvola merino tops) horizontally for the shrinkage to primarily occur in that direction. Tease out the wool and cover the whole of the space of side 1 of the fabric, leaving at least 10-15 cm on the sides not covered. When you finish laying the wool add the grey viscose and mulberry silk in piles (pockets of fibres) leaving some spaces in between.

poncho - nuno felting tutorial

I have also added 6-8 silk hankies on top of my fibres for added texture, etc. by pulling them by the edges and spreading them thin.

Side 1 – felting the first layer of fibre

Sprinkle the project generously with lukewarm water and liquid soap evenly. Cover with bubble wrap. Pat with your towel on top of the bubble wrap for the water to go through and make sure your project is evenly wet.

tetyana robinson - poncho tutorial

Use the sander and go over the whole of the project leaving it for 10 seconds or so in one spot. You will see the white thick foam with begin to form on top of the project. It is important the surface is not oversaturated and soggy.

Using the plastic glove (with the bubble wrap still covering the project) go over the project in rubbing circling movement creating more soapy suds but without applying excessive pressure. When the surface is soapy enough, flip the fabric to the other side, take the plastic off and rub the reverse side with a gentle circling motion without applying pressure or force. It is important to spend enough time and not to rush this stage to enable the smaller fibres to come through the surface and bond with the wool gauze fabric.

poncho - nuno felting tutorial

Lightly connect the opposite corners and wiggle the fabric from the opposite ends. This helps the next stage of the process to begin. Continue for 10-15 times. Rub the fabric and fibres gently against the bubble wrap of needed adding a bit of a sprinkle if the fabric looks dry and checking the feel of this stage. Gently throw all of the project up in the air as an open sheet without scrunching it or being too forceful. Repeat 20-25 times.

wet felting tutorial

Continue with rubbing the fabric against the bubble wrap surface decor down with medium strength.

wool gauze

poncho - nuno felting tutorial

Photo of rubbing the wool gauze fabric against the bubble wrap face down.

tetyana robinson - fiber art

Gather the project in a big pile with decor part being inside and throw with some effort onto the table – repeat about 30-40 times. In contrast to other materials that I used before, the reverse side of the wool gauze will remain smooth, not crinkles appear. Rinse in cold water in the sink and leave overnight to dry.

poncho - nuno felting tutorial

Photo of the dry side 1.

Side 2 – felting the second layer of fibre

Continue to lay the second side with merino wool tops horizontally marking the opening for the head (35-40 cm) from the top left corner. The opening width can be adjusted according to your preference.

poncho - nuno felting tutorial

For my design I opted to use a layer of merino tops followed by grey viscose, mulberry silk and then decorating it with clouds of other colours of viscose and silk (purple and blue). For additional texture I added elements of ponge silk fabric and cotton gauze bits left over covering the edges of the fabric with a thin layer merino wool all around.

poncho - nuno felting tutorial

The design also utilizes negative space intentionally, so that you can see places where the open wool gauze is uncovered as shown in this photo.

viscose tops

Repeat the same steps on side 2 stage 1 and 2 as in day 1 written above. Do the pinch test to see if the project is fully felted by pulling gently on the felted decor.

viscose tops

poncho - nuno felting tutorial

poncho - nuno felting tutorial

Final stage for both sides

After both sides dry and are finished in terms of the wet felting process, I had a few fittings to mark the precise place for the head opening and to make final alterations for the length chosen etc. I went for quite a wide opening since the overall feel of the poncho is oversize and it looked good slightly off shoulder. The fabric edges have a very natural floaty feel and I chose to leave them unfinished. Use the sewing machine to finish the seam on one arm and wet felt over it using grey merino wool and viscose.The wool gauze bonds so easily with wool and fibres.

The outcome of this project is a medium-weight poncho that is perfect for in between seasons. The garment feels very soft and comfortable against the skin as the materials used for it are so light and luxurious – it feels comfortable even over a simple t-shirt.

poncho - nuno felting tutorial

poncho - nuno felting tutorial

Spring is a natural time to explore new accessories and refresh our wardrobe. I hope you enjoy this tutorial and feel inspired and confident to make your own artisan poncho this season!

Related Post

7 Comments for How to make a spring pastel poncho – Tanya Robinson

  1. Anna Bloch

    What a great article on DIY poncho! Thank you for sharing the hows and whats! May try… Is there a master class available and/or the store to find a piece of art like that?

  2. Annalisa Chelli

    Hi Anna, glad to know you enjoyed it! For future masterclass or workshop please write to: tanyar@icloud.com

  3. Jennifer Angelo

    Hello Tanya
    I have read through the instructions and have a question. What a great idea, color choices and pattern. So you made one side one day and the waited until Day 2 to layout and felt the second side. Why didn’t you layout the second side right after laying out the first side and felt them at the same time? Since Side 1 was already felted won’t it shrink more than you want as you felt Side 2? Could you post the pattern?
    thank you

  4. Annalisa Chelli

    In my case I wanted to see how side 1 responds before I do side 2 front side that had a more vibrant decor. Since I did the same steps in manipulations of each side, it was similar since the whole feel of poncho is organic, not even anyway.
    To help the process you can adjust your efforts accordingly with the amount of time you rub/ throw at the end. This is where you check as you go and remain flexible with what is needed in final stages. Of course it is easier if you are not thinking about photographing it for the blog and available sun in England on the day 😊
    You can choose to lay the the wool across side 1 and 2 at once. There is no right and wrong. I would only make sure you have enough time and not be rushed with the design at that stage.
    Sometimes it is strictly the amount of space, the sheer size of the project and time it takes to lay the wool and fibres.

  5. Jennifer Angelo

    I wrote this earlier but wondered if it got lost. According to the directions you felt one side before laying out and felting the other side. Doesn’t this method make side one shrink more? Why not do sides 1 and 2 at the same time? Thanks

  6. Annalisa Chelli

    Thank you for your question. The shrinkage predicted is important to consider. That is why I always do samples and see how the shrinkage would be if the wool laid a certain way, etc. Even so you never know how it would be if the fabric is new to you, the organic nature of the process itself.

  7. Jennifer Angelo

    Could you please post a photo of the pattern?

Write a comment